Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Foumelding. #564

Open
Beginner69 opened this issue Jun 21, 2022 · 9 comments
Open

Foumelding. #564

Beginner69 opened this issue Jun 21, 2022 · 9 comments

Comments

@Beginner69
Copy link

I wanted to upload the firmware to my Sidewinder X2 with SKR-2 board but I keep getting an error message: "Volume.init failed". How can I fix that?
@radek8
Copy link

radek8 commented Jun 21, 2022 •
edited
Loading

You used a bad repo.
Problems with SKR1.3 and SKR1.4 are solved here
SKR2 is here:
https://github.com/bigtreetech/SKR-2/issues

Your information is incomplete.
What system do you use? Marlin, RRF, Klipper, Smoothie, ...
What action will take the error after?
If the SD card is related, which card do you use?
What format is it, which SD card reader do you use (on the display or on the SKR)?
Can you share the configuration?

@Beginner69
Copy link
Author

Dear,

thank you for the response. I may have been a bit sloppy with my information, my apologies.
That is my current configuration: printer is Sidewinder X1, board BTT SKR-2 (SMT32F429VGT6) , drivers TMC 2209, screen and BTT TFT3. 5 V3. I am using a 1GB micro SD card and now insert it into the board. Earlier I made the mistake of putting the card in the TFT screen, but I don't anymore. I tried to make the firmware with Marlin.

@radek8
Copy link

radek8 commented Jun 25, 2022 •
edited
Loading

The card should be in FAT or FAT32 format.
Reformat the SD card, or use another SD card.
Some SD cards have a reading problem.
Send a video when the problem occurs.

@Beginner69
Copy link
Author

Beginner69 commented Jun 25, 2022 via email

@radek8
Copy link

radek8 commented Jun 25, 2022

Here you have a sample configuration.
https://github.com/MarlinFirmware/Configurations/tree/import-2.1.x/config/examples/Artillery/Sidewinder%20X2

@Beginner69
Copy link
Author

Beginner69 commented Jun 26, 2022 via email

@Beginner69
Copy link
Author

I was looking for țhe configuration.h but wat I receive from you is not for Sidewinder X1 but for Sidewinder-X2. I am not a programmer, is it really not possible to download a good firmware for Sidewinder-X1 with a SKR-2 board and 2209 drivers?

@radek8
Copy link

radek8 commented Jun 27, 2022

In the beginning, you said you had a Sidewinder X2.
Now you claim that this is a Sidewinder X1.
Think about what you write.

At the beginning, I wrote you that you were writing to the wrong repository.
This storage is not for SKR2 or Sidewinder.
SKR V1.4 or SKR V1.3 are solved here.
You won't find SKR2 users who would share FW with you here.

If you cannot build your own FW, do not upgrade the printer.
I'm also not a programmer, but just look at a few videos to do it yourself.

@Beginner69
Copy link
Author

Beginner69 commented Oct 11, 2022 via email

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@radek8 @Beginner69