Skip to content

Latest commit

 

History

History
31 lines (24 loc) · 2.17 KB

README.md

File metadata and controls

31 lines (24 loc) · 2.17 KB
Raw

Movement estimation STM32L4 B-L475E-IOT01A

A POC program that estimates (not in the most efficient way) the four movement/gestures standing, walking, running and falling and sends the results to a hub (Matlab). Along with the gesture estimation, the microcontroller, captures the current humidity and temperature and sends them to the hub along with the a boolean value that says if the environment is inside the human comfort zone, specified on this (article from Berkeley, Tartarini, F., Schiavon, S., Cheung, T., Hoyt, T.)[https://comfort.cbe.berkeley.edu/] The microcontroller is the STM32L4 B-L475E-IOT01A with the mbed-os 6.17.0 firmware.

Movement estimation logic

The accelerometer and gyroscope, read the values in arrays of length 3 [x, y, z] and we store them in two separate 3-length arrays. The movement types that the program can estimate are standing, walking, running and falling. The user movement is considered as periodic and back-and-forth. So we just check the scale of the change in the accelerator and gyroscopre values. For example, if the difference between the current accelerometer Z axis and previous one is above 600, then the result is "run".

In addition, we store the last 10 samples in two 2d matrices [[x1,y1,z1], [x2,y2,z2],...,[x10,y10,z10]], one for each movement sensor, the last 10 estimations results and the last 10 result confidence.

Sampling rate change

In order to use the least possible resources, we modify the sampling rate depending on the scale of the sensor values change. If there are not big changes then we decrease the sampling rate. The change of the sampling rate is happening in an exponential rate using the function live_change_sampling_rate. The function argument, is actually the number that is going to be added to the exponent.

void live_change_sampling_rate(float add_exp){
    SAMPLING_RATE_EXP = SAMPLING_RATE_EXP + add_exp;
    if(SAMPLING_RATE_EXP >= 7){
        SAMPLING_RATE_EXP = 6;
    } else if(SAMPLING_RATE_EXP <= 1) {
        SAMPLING_RATE_EXP = 1;
    } else {}
    SAMPLING_RATE_MILLISECONDS = LEAST_SAMPLING_RATE_MILLISECONDS + exp(SAMPLING_RATE_EXP);
}
Development

Keil studio, mbed-os version 6.17.0