Skip to content

Latest commit

 

History

History
165 lines (119 loc) · 6.43 KB

HOWTO.md

File metadata and controls

165 lines (119 loc) · 6.43 KB

How To Run

There are three ways to run dubbo-go samples:

  1. Quick start with bash command: start the sample and perform unit testing through a simple command line
  2. Quick start in IDE (Recommended): In ".run" subdirectory a couple of GoLand run configuration files are provided so that user can run each sample with just one click.
  3. Manually config and run in IDE: For completeness purpose, a step-by-step instruction is also provided so that user can understand how to configure and run or debug a sample in IDE.

1. Quick start with makefile

Prerequisite: docker environment is required

Here we use "helloworld" as an example:

  1. Get the root path of dubbo-go-samples

    cd <PATH OF dubbo-go-samples>
    export DUBBO_GO_SAMPLES_ROOT_PATH=$(pwd)
  2. Start register server (e.g. zookeeper)

    make -f build/Makefile docker-up 

    Once the following messages outputs, the zookeeper server is ready.

    >  Starting dependency services with ./integrate_test/dockercompose/docker-compose.yml
    Docker Compose is now in the Docker CLI, try `docker compose up`
    
    Creating network "dockercompose_default" with the default driver
    Creating dockercompose_zookeeper_1 ... done
    Creating etcd                      ... done
    Creating nacos-standalone          ... done

    To shut it down, simple run

    make -f build/Makefile docker-down
  3. Start server

    cd helloworld/go-server/cmd
    export DUBBO_GO_CONFIG_PATH="../conf/dubbogo.yml"
    go run .

    Once the following messages outputs, the server is ready.

    2021/10/27 00:33:10 Connected to 127.0.0.1:2181
    2021/10/27 00:33:10 Authenticated: id=72057926938066944, timeout=10000
    2021/10/27 00:33:10 Re-submitting `0` credentials after reconnec

    The output of go-server can be found from 'dist/darwin_amd64/release/go-server.log'.

  4. Run client

    cd helloworld/go-client/cmd
    export DUBBO_GO_CONFIG_PATH="../conf/dubbogo.yml"
    go run .

    Once the following messages outputs, the go-client calls the go-server successfully.

    2021-10-27T00:40:44.879+0800    DEBUG   triple/dubbo3_client.go:106     TripleClient.Invoke: get reply = name:"Hello laurence" id:"12345" age:21 
    2021-10-27T00:40:44.879+0800    DEBUG   proxy/proxy.go:218      [makeDubboCallProxy] result: name:"Hello laurence" id:"12345" age:21 , err: <nil>
    2021-10-27T00:40:44.879+0800    INFO    cmd/client.go:51        client response result: name:"Hello laurence" id:"12345" age:21
  5. Integration test dubbo-go-samples is designed to serve the purposes of not only the showcases of how to use apache/dubbo-go but also the integration-test for apache/dubbo-go. To run integration test for go-server, run the following commands:

    Start the server first

    cd helloworld/go-server/cmd
    export DUBBO_GO_CONFIG_PATH="../conf/dubbogo.yml"
    go run .

    Then switch to the single test directory, set the environment variables, and then execute the single test

    cd integrate_test/helloworld/tests/integration
    export DUBBO_GO_CONFIG_PATH="../../../../helloworld/go-client/conf/dubbogo.yml"
    go test -v

    Once the following messages outputs, the integration tests pass.

    >  Running integration test for application go-server
    ...
    --- PASS: TestSayHello (0.01s)
    PASS
    ok      github.com/apache/dubbo-go-samples/integrate_test/helloworld/tests/integration  0.119s
  6. Shutdown and cleanup

    make -f build/Makefile clean docker-down

The following two ways are all relevant to IDE. Intellij GoLand is discussed here as an example.

2. Quick start in IDE

Once open this project in GoLand, a list of pre-configured configures for both server and client can be found from "Run Configuration" pop up menu, for example: "helloworld-go-server" and "helloworld-go-client".

run-configuration.png

Feel free to pick one among them to run instantly. Of course a service register server is required otherwise the samples cannot run successfully. You may consider to either manually boot up the required register server, or use the provided "docker-compose.yml" to boot it in docker environment, from the following section where you can find more details.

3. Manually run in IDE

After open dubbo-go-samples in GoLand, follow the steps below to run/debug this example:

  1. Start up zookeeper server

    Open "integrate_test/dockercompose/docker-compose.yml", and click ▶︎▶︎ icon in the gutter on the left side of the editor, then "Services" tab should pop up and shows the similar message below:

    Deploying 'Compose: docker'...
    /usr/local/bin/docker-compose -f .../dubbo-go-samples/helloworld/go-server/docker/docker-compose.yml up -d
    Creating network "docker_default" with the default driver
    Creating docker_zookeeper_1 ...
    'Compose: docker' has been deployed successfully.
    
  2. Start up service provider

    Open "helloworld/go-server/cmd/server.go", and click ▶︎ icon just besides "main" function in the gutter on the left side, and select "Modify Run Configuration..." from the pop-up menu. Then make sure the following configs configured correctly:

    • Working Directory: the absolute path to "helloworld/go-server", for examples: * /home/dubbo-go-samples/helloworld/go-server*
    • Environment: DUBBO_GO_CONFIG_PATH="../conf/dubbogo.yml"

    Then the sample server is ready to run.

  3. Run service consumer

    Open "helloworld/go-client/cmd/client.go", and click ▶︎ icon just besides "main" function in the gutter on the left side, and select "Modify Run Configuration..." from the pop-up menu. Then make sure the following configs configured correctly:

    • Working Directory: the absolute path to "helloworld/go-client", for examples: * /home/dubbo-go-samples/helloworld/go-client*
    • Environment: DUBBO_GO_CONFIG_PATH="../conf/dubbogo.yml"

    Then run it to call the remote service, you will observe the following message output:

    [2021-02-03/16:19:30 main.main: client.go: 66] response result: &{A001 Alex Stocks 18 2020-02-04 16:19:30.422 +0800 CST}
    

If you need to debug either the samples or dubbo-go, you may consider switch to Debug instead of Run in GoLand. To stop, simply click ◼︎ to shutdown everything.