Error with SSL Mosquitto connection

[seineken]

I'm getting an error when activated the SSL with Let's Encrypt in the Mosquitto broker.

This is the log from the device:

✖ /homie/config.json doesn't exist
Configuration invalid. Using CONFIG MODE
Configuration mode started
�💡 Firmware growtth-nanny (1.0.
�🔌 Booting innto config mode
Device ID is ecfabc6e221c
AP started as GN-ecfabc6e221c with IP 192.168.123.1
Triggering Wi-Fi scan...
✔ Wi-Fi scan completed
Triggering Wi-Fi scan...
✔ Wi-Fi scan completed
Triggering Wi-Fi scan...
✔ Wi-Fi scan completed
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: UI bundle found
Triggering Wi-Fi scan...
Received captive portal request: Redirect: http://192.168.123.1
✔ Wi-Fi scan completed
Received captive portal request: UI bundle found
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: Redirect: http://192.168.123.1
Received heart request
Received device information request
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: Redirect: http://192.168.123.1
Received captive portal request: UI bundle found
Received captive portal request: UI bundle found
Received networks request
Triggering Wi-Fi scan...
✔ Wi-Fi scan completed
Received config request
✔ Configured
↻ Rebooting into normal mode...
����L��D���

Normal mode started
�💡 Firmware growth-nanny (1.0.
�🔌 Booting into normal moode
{} Stored configuration
• Hardware device ID: ecfabc6e221c
• Device ID: ecfabc6e221c
• Name: Veg
• Device Stats Interval: 60 sec
• Wi-Fi:
◦ SSID: *******
◦ Password not shown
• MQTT:
◦ Host: ***********
◦ Port: 8883
◦ Base topic: devices/
◦ Auth? yes
◦ Username: *****
◦ Password not shown
• OTA:
◦ Enabled? yes
• Custom settings:
◦ readInterval: 5 (set)
↕ Attempting to connect to Wi-Fi...
✖ Wi-Fi disconnected, reason: 4
Triggering WIFI_DISCONNECTED event...
Wi-Fi disconnected, reason: 4
↕ Attempting to connect to Wi-Fi...
✔ Wi-Fi connected, IP: 192.168.1.5
Triggering WIFI_CONNECTED event...
Wi-Fi connected, IP: 192.168.1.5, gateway: 192.168.1.254, mask: 255.255.255.0
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...
↕ Attempting to connect to MQTT...

This is the log from Mosquitto broker:

1590086726: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086727: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086731: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086739: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086754: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086777: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.
1590086813: Client connection from 179.13.148.144 failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number.

I'm using Homie 3.0.0

This is my platformio.ini

[env:nodemcuv2]
platform = espressif8266
board = nodemcuv2
framework = arduino
build_flags = -D PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
lib_deps = https://github.com/homieiot/homie-esp8266.git#develop

[mkfrey]

It looks like you haven't enabled SSL. You need to set the flag ASYNC_TCP_SSL_ENABLED.