Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fanimation Fan Remote #3033

Open
roblandry opened this issue Aug 15, 2024 · 7 comments
Open

Fanimation Fan Remote #3033

roblandry opened this issue Aug 15, 2024 · 7 comments

Comments

@roblandry
Copy link

roblandry commented Aug 15, 2024 •
edited
Loading

UPDATE: Best i could do based on code limitations is below

I have decoded and figured out the remote codes.
bitbench

fanimation_fan.zip

I am down to figuring out how to create the decoder and am stumped as to the format.

# Decoder for Fanimation fan remotes.

# https://fcc.report/FCC-ID/KUJCE10711/4100428
# rtl_433 -f 304.25M -R 0 -X 'n=name,m=OOK_PWM,s=400,l=800,g=1000,r=12000,bits=25'

# Dipswitch:
# up = off(0), down = on(1)
# 12b 5b[dip switch] 8b[command]
# 100000000000 11111 00000000 (0x800f800)
# 100000000000 00011 00000000 (0x8001800)
# 100000000000 00000 00000000 (0x8000000)

# g001_304.25M_250k = Fan On/Off
# {25}0x8001800

# g002_304.25M_250k = Fan Down
# g003_304.25M_250k = Fan Up
# {25}0x8001a08, 18, 28, 38, 48, 58, 68, 78, 88, 98, a8, b8, c8, d8, e8, f8

# g004_304.25M_250k = Light On/Off
# {25}8001d90 (brightness value), 0x8001c00 (off)

# g005_304.25M_250k = Light Brightness
# {25}8001d90, d88, d80, d78, d70, d68, d60, d58, d50, d48, d40, d38, d30, 
#              d28, d20, d18, d10, d08, d00, cf8, cf0, ce8, ce0, cd8, cd0, 
#              cc8, cc0, cb8, cb0, ca8, ca0, c98, c90, c88, c80, c78, c70,
#              c68, c60, c58, c50, c48, c40, c38

# g006_304.25M_250k = Light ColorTemp
# {25}8001b30

# g007_304.25M_250k = 1HR Timer
# {25}8001908

# g008_304.25M_250k = 3HR Timer
# {25}8001910

# g009_304.25M_250k = 6HR Timer
# {25}8001918

# g0010_304.25M_250k = Away (Auto on/off simulation)
# {25}8001b20

# g0011_304.25M_250k = Natural Breeze
# {25}80019d0

# g0012_304.25M_250k = Person (1 min turn off)
# {25}8001b28

# g0013_304.25M_250k = Winter (counter clockwise)
# {25}8001b18

# g0014_304.25M_250k = Summer (clockwise)
# {25}8001b10


frequency 304.25M

decoder {
    name        = Fanimation-Fan,
    modulation  = OOK_PWM,
    bits        = 25,
    short       = 400,
    long        = 800,
    gain        = 1000,
    reset       = 12000,
    # this is preexisting from the template used
    # get         = id:@0:{16},
    # get         = button:@16:{5}:[16:fan_low 8:fan_med 24:fan_hi 2:fan_off 5:light_off_delayed 26:light_on_off 14:light_dim_brighten 21:learn_mode],
    # get         = dimmable:@23:{1}:[0:no 1:yes]
}

Additionally I would like to know if it is possible to send commands, as that's my ultimate goal (with homeassistant). And im not looking for homeassistant support here.
@zuckschwerdt
Copy link
Collaborator

That's an EV1527 code. The first bit will be the sync (of the previous code).
The get-commands should work, the args are:
name : @ start-bit : { bit-length } : [ optional value mapping, decimal number to text ]

@roblandry
Copy link
Author

So would it be like this?

decoder {
    name        = Fanimation-Fan,
    modulation  = OOK_PWM,
    bits        = 25,
    short       = 400,
    long        = 800,
    gain        = 1000,
    reset       = 12000,
    get         = id:@13:{5},  # use the dipswitch as the id
    get         = fan_on_off:@18:{8}:[0:fan_on_off],
    get         = fan_up_down:@18:{8}:[
                    65:fan_speed_1
                    67:fan_speed_5
                    69:fan_speed_10
                    71:fan_speed_15
                    73:fan_speed_20
                    75:fan_speed_25
                    77:fan_speed_30
                    79:fan_speed_40
                    81:fan_speed_50
                    82:fan_speed_60
                    83:fan_speed_70
                    85:fan_speed_75
                    87:fan_speed_80
                    89:fan_speed_85
                    91:fan_speed_90
                    93:fan_speed_95
                    95:fan_speed_100],
    get         = light_off:@18:{8}:[128:light_off],
    get         = light_on_brightness:@18:{8}:[
                    135:light_brightness_1
                    136:light_brightness_2
                    137:light_brightness_4
                    138:light_brightness_6
                    139:light_brightness_8
                    140:light_brightness_10
                    141:light_brightness_12
                    142:light_brightness_14
                    143:light_brightness_16
                    144:light_brightness_18
                    145:light_brightness_20
                    146:light_brightness_22
                    147:light_brightness_24
                    148:light_brightness_26
                    149:light_brightness_28
                    150:light_brightness_30
                    151:light_brightness_32
                    152:light_brightness_34
                    153:light_brightness_36
                    154:light_brightness_38
                    155:light_brightness_40
                    156:light_brightness_44
                    157:light_brightness_48
                    158:light_brightness_52
                    159:light_brightness_56
                    160:light_brightness_60
                    161:light_brightness_64
                    162:light_brightness_68
                    163:light_brightness_70
                    164:light_brightness_72
                    165:light_brightness_74
                    166:light_brightness_76
                    167:light_brightness_78
                    168:light_brightness_80
                    169:light_brightness_82
                    170:light_brightness_84
                    171:light_brightness_86
                    172:light_brightness_88
                    173:light_brightness_90
                    174:light_brightness_92
                    175:light_brightness_94
                    176:light_brightness_96
                    177:light_brightness_98
                    178:light_brightness_100],
    get         = light_color_temp:@18:{8}:[102:light_change_color_temp],
}

@zuckschwerdt
Copy link
Collaborator

Should be @17:{8} I'd say, first index is 0.

@roblandry
Copy link
Author

So i have some of it functional, but it looks like you cannot have very many mappings.
16 is fine.
17: [1] 3180535 segmentation fault (core dumped) rtl_433 -g 1000 -c fanimation_fan.conf

Am i missing something?

@zuckschwerdt
Copy link
Collaborator

Ah yes, you are right: 12 getters and a maximum of 16 mappings each.
You could raise that here if needed: https://github.com/merbanan/rtl_433/blob/master/src/devices/flex.c#L66

@roblandry
Copy link
Author

Id really like to not mess with core code. Based on the limitations, this is the best i could come up with:

# Decoder for Fanimation fan remotes.

# https://fcc.report/FCC-ID/KUJCE10711/4100428
# rtl_433 -f 304.25M -R 0 -X 'n=name,m=OOK_PWM,s=400,l=800,g=1000,r=12000,bits=25'

# Dipswitch:
# up = off(0), down = on(1)
# 12b 5b[dip switch] 8b[command]
# 100000000000 11111 00000000 (0x800f800)
# 100000000000 00011 00000000 (0x8001800)
# 100000000000 00000 00000000 (0x8000000)

# g001_304.25M_250k = Fan On/Off
# {25}0x8001800 [dec 0]

# g002_304.25M_250k = Fan Down
# g003_304.25M_250k = Fan Up
# {25}0x8001a08, 18, 28, 38, 48, 58, 68, 78, 88, 98, a8, b8, c8, d8, e8, f8 [dec(odd numbers) 65 - 95]

# g004_304.25M_250k = Light On/Off
# {25}8001d90 (brightness value), 0x8001c00 (off) [dec 128]

# g005_304.25M_250k = Light Brightness
# {25}8001d90, d88, d80, d78, d70, d68, d60, d58, d50, d48, d40, d38, d30, 
#              d28, d20, d18, d10, d08, d00, cf8, cf0, ce8, ce0, cd8, cd0, 
#              cc8, cc0, cb8, cb0, ca8, ca0, c98, c90, c88, c80, c78, c70,
#              c68, c60, c58, c50, c48, c40, c38 [dec 135 - 178]

# g006_304.25M_250k = Light ColorTemp
# {25}8001b30 [dec 102]

# g007_304.25M_250k = 1HR Timer
# {25}8001908 [dec 33]

# g008_304.25M_250k = 3HR Timer
# {25}8001910 [dec 34]

# g009_304.25M_250k = 6HR Timer
# {25}8001918 [dec 35]

# g0010_304.25M_250k = Away (Auton on/off simulation)
# {25}8001b20 [dec 100]

# g0011_304.25M_250k = Natural Breeze
# {25}80019d0 [dec 58]

# g0012_304.25M_250k = Person (1 min turn off)
# {25}8001b28 [dec 101]

# g0013_304.25M_250k = Winter (counter clockwise)
# {25}8001b18 [dec 99]

# g0014_304.25M_250k = Summer (clockwise)
# {25}8001b10 [dec 98]


frequency 304.25M

decoder {
    name        = Fanimation-Fan,
    modulation  = OOK_PWM,
    bits        = 25,
    short       = 400,
    long        = 800,
    gap         = 1000,
    reset       = 12000,
    get         = id:@12:{5},
    get         = modes:@17:{8}:[
                    33:timer_1hr
                    34:timer_3hr
                    35:timer_6hr
                    100:fan_away
                    101:fan_person
                    58:fan_breeze
                    98:summer
                    99:winter
                    0:fan_on_off
                ],
    get         = fan_speed_low:@17:{8}:[
                    1:fan_speed_5
                    3:fan_speed_10
                    5:fan_speed_15
                    7:fan_speed_20
                    9:fan_speed_25
                    11:fan_speed_30
                    13:fan_speed_40
                    15:fan_speed_50
                ],
    get         = fan_speed_high:@17:{8}:[
                    17:fan_speed_60
                    19:fan_speed_70
                    21:fan_speed_75
                    23:fan_speed_80
                    25:fan_speed_85
                    27:fan_speed_90
                    29:fan_speed_95
                    31:fan_speed_100
                ],
    get         = light_control:@17:{8}:[
                    128:light_off
                    102:light_change_color_temp
                ],
    get         = light_bright_low:@17:{8}:[
                    135:light_brightness_1
                    136:light_brightness_2
                    137:light_brightness_4
                    138:light_brightness_6
                    139:light_brightness_8
                    140:light_brightness_10
                    141:light_brightness_12
                    142:light_brightness_14
                    143:light_brightness_16
                    144:light_brightness_18
                    145:light_brightness_20
                    146:light_brightness_22
                    147:light_brightness_24
                    148:light_brightness_26
                ],
    get         = light_bright_mid:@17:{8}:[
                    149:light_brightness_28
                    150:light_brightness_30
                    151:light_brightness_32
                    152:light_brightness_34
                    153:light_brightness_36
                    154:light_brightness_38
                    155:light_brightness_40
                    156:light_brightness_44
                    157:light_brightness_48
                    158:light_brightness_52
                    159:light_brightness_56
                    160:light_brightness_60
                    161:light_brightness_64
                    162:light_brightness_68
                    163:light_brightness_70
                ],
    get         = light_bright_high:@17:{8}:[
                    164:light_brightness_72
                    165:light_brightness_74
                    166:light_brightness_76
                    167:light_brightness_78
                    168:light_brightness_80
                    169:light_brightness_82
                    170:light_brightness_84
                    171:light_brightness_86
                    172:light_brightness_88
                    173:light_brightness_90
                    174:light_brightness_92
                    175:light_brightness_94
                    176:light_brightness_96
                    177:light_brightness_98
                    178:light_brightness_100
                ],
}

@zuckschwerdt
Copy link
Collaborator

Very nice, clever solution! PR the conf file if you like.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@zuckschwerdt @roblandry