variant of the somfy-rts protocol?

[xjazzor]

Hi there,
I have some Roller Shades at home, which seem to be using the Somfy-RTS protocoll. I sniffed some packets with the rtl_433-plugin for SDR# as seen here:

You can see, everything is recognised except Lines 8 and up. These are the lines, where I want to program a new remote onto the shade.
If I press the same "buttons" on the virtual remote from the great EspSomfy (https://github.com/rstrouse/ESPSomfy-RTS) I get the following:

Are my shades on a different protocol, or do I need to edit something? I can provide more info if needed and want to solve this riddle :D

[zuckschwerdt]

If you can try listening with current rtl_433. Try -R 167:vv to get the raw packets also.
There are some senders with extra data or slightly different meaning, see https://github.com/merbanan/rtl_433/blob/master/src/devices/somfy_rts.c

[xjazzor]

Thank you for your help!
I pulled the data from rtl_433 and attached the readout as a file. As an excerpt, here are some readouts from down, stop, up and then program: (Attention: the examples below are not directly one after the other. The counter increments in single steps)

`_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2024-08-21 20:00:55
model : Somfy-RTS id : C5154A
Control : Down (8) Counter : 1086 Retransmission: 1 Integrity : CHECKSUM
[pulse_slicer_pcm] Somfy RTS
codes : {179}f0f0f0f0f0f0f0fe696a965a966a9996a95aaa695a5a0
[pulse_slicer_pcm] Somfy RTS
codes : {139}f0f0fe696a965996699996a95aaa695a5a0
[somfy_rts_decode] seed=0x98, chksum=0x5

---

time : 2024-08-21 20:00:58
model : Somfy-RTS id : C5154A
Control : Stop (5) Counter : 1088 Retransmission: 1 Integrity : CHECKSUM
[pulse_slicer_pcm] Somfy RTS
codes : {180}f0f0f0f0f0f0f0fe6999969996a9a6a99665955665650
[somfy_rts_decode] seed=0x95, chksum=0x0

---

time : 2024-08-21 20:01:00
model : Somfy-RTS id : C5154A
Control : Up (6) Counter : 1089 Retransmission: 1 Integrity : CHECKSUM
[pulse_slicer_pcm] Somfy RTS
codes : {180}f0f0f0f0f0f0f0fe6996969a96aaa6a99665955665650
[somfy_rts_decode] seed=0x96, chksum=0x2

---

time : 2024-08-21 20:01:16
model : Somfy-RTS id : C5154A
Control : ? (12) Counter : 1091 Retransmission: 1 Integrity : CHECKSUM
[pulse_slicer_pcm] Somfy RTS
codes : {180}f0f0f0f0f0f0f0fe695a969696a6a6a99665955665650
[somfy_rts_decode] seed=0x9c, chksum=0xa

---

time : 2024-08-21 20:01:16
model : Somfy-RTS id : C5154A
Control : ? (12) Counter : 1091 Retransmission: 1 Integrity : CHECKSUM
[pulse_slicer_pcm] Somfy RTS
codes : {180}f0f0f0f0f0f0f0fe695a969696a6a6a99665955665650
[somfy_rts_decode] seed=0x9c, chksum=0xa
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`

From my - somewhat limited perspective - it looks, like the remote just spams its id with another seed code - Before it was 0x95 now its 0x9c. I'm just gessing here. ;)

somfy-like-packets.txt

[zuckschwerdt]

Those codes are great to analyze this. Maybe @matthiasseemoo (original author in #1496) and @Velocet (good info in #2356) can help?

[xjazzor]

Should I provide more packets/ recordings? Can I help in any way?
My second remote died and I can't find any shop to buy a new one. Therefore I want this to work. ;)