Skip to content

Incorporating detailed transport properties with OpenFOAM reactingFoam solver for direct numerical simulation of multi-component reacting flows

Notifications You must be signed in to change notification settings

Fluid-Mechanics-Lund-University/reactingDNS_OpenFOAM

 
 

Repository files navigation

reactingDNS_OpenFOAM

Incorporating detailed transport properties with OpenFOAM reactingFoam solver for direct numerical simulation of multi-component reacting flows

In the OpenFOAM's native solver, reactingFoam, the original transport equations for species mass fractions were based on the simple asscumptions of unity Schmidt number. And the dynamic viscosity was calculated using the Sutherland equation. This is acceptable for RANS or LES simulation of turbulent combustion, in which the molecular diffusion being negligible in comparison with the turbulent diffusion. But this is not acceptable for the reaction-diffusion process, e.g. laminar flame propagation.

Current solver reactingDNS use the third-order logarithm polynomial fitting method to descirbe the detailed transport properties (viscosity, thermal conducitivity and binary diffusion coefficient) of each species [1]. And the mixture-average transport model is used to calculate the mixture properties.

Usage:

Step 1:

Using ANSYS CHEMKIN to fit the transport data. The tran.out can be outputted when you selecte to process Transport properties with Fit with Verbose Output.

Step 2:

Using the formatConvert python code to convert tran.out to four files: binaryDiff, speciesLambda, speciesMu and thermoDiff.

Only H and H2 are considered to have the thermoDiff.

Step 3:

Put the binaryDiff, speciesLambda, speciesMu, thermoDiff and trandat into the constant directory.

Step 4:

Trun on/off the switch of differentialDiffusion and thermalDiffusion. If differetialDiffusion is off, the unity Lewis number will be adopted for all species.

Attention:

When the species name starts with number in trandat, you need to change it to word by add double quotation marks, e.g. 1H2 to "1H2".

Please ensure there is no extra useless lines at the end of the tran.out when you use the writetofoam.

Please ensure you have a blank line at the beginning of the trandat when you put it into the case.

Current method is simple and can be easily implemented in other solvers in OpenFOAM. When you are using this solver to publish paper, please kindly consider to cite following papers, in which n-heptane/air laminar premixed flames in a low-temperature ignition regime [2], spherical laminar premixed flame with intrinsic flame instability [3], turbulent flame propagation and ignition [4, 5] and ammonia/methane/air premixed laminar burner flame [6] were stuided.

[1] Kee, R. J.; Dixon-Lewis, G.; Warnatz, J.; Coltrin, M. E.; Miller, J. A. A Fortran com-puter code package for the evaluation of gas-phase multicomponent transport properties.Sandia National Laboratories Report SAND86-8246, 1986, 13, 80401–1887.

[2] Zhong, S.; Zhang, F.; Jangi, M.; Bai, X.-S.; Yao, M.; Peng, Z. Structure and propagation of n-heptane/air premixed flame in low temperature ignition regime. Applied Energy, 2020, 275, 115320.

[3] Zhang, N.; Zhang, F.; Zhong, S.; Peng, Z.; Yu, J.; Liu, H.; Xu, C. Numerical and theoretical investigation of ethanol/air flame instability. Combustion Theory and Modelling, 2020, 1–22.

[4] Zhong, S.; Zhang, F.; Peng, Z.; Bai, F.; Du, Q. Roles of CO2 and H2O in premixed turbulent oxy-fuel combustion. Fuel, 2018, 234, 1044–1054.

[5] Zhong, S.; Zhang, F.; Du, Q.; Peng, Z. Characteristics of reactivity controlled combustion with n-heptane low temperature reforming products. Fuel, 2020, 275, 117980.

[6] Rodolfo C. Rocha, Shenghui Zhong, Leilei Xu, Xue-Song Bai, Mário Costa, Xiao Cai, Haisol Kim, Christian Brackmann, Zhongshan Li, and Marcus Aldén Energy & Fuels 2021 35 (9), 7179-7192. DOI: 10.1021/acs.energyfuels.0c03520.

About

Incorporating detailed transport properties with OpenFOAM reactingFoam solver for direct numerical simulation of multi-component reacting flows

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 98.5%
  • Python 1.1%
  • Shell 0.4%