Skip to content

Integration between ARGoS3 and the AWS DeepRacer robot.

Notifications You must be signed in to change notification settings

NESTLab/argos3-deepracer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

51 Commits
 
 
 
 
 
 
 
 

Repository files navigation

ARGoS3 - AWS DeepRacer integration

This repository contains the code that integrates the ARGoS3 multi-robot simulator and the AWS DeepRacer robot.

This code allows you to simulate the AWS DeepRacer in ARGoS3, and to run ARGoS3 controllers on the real AWS DeepRacer.

Compilation Instructions

If you intend to use this plugin on the real robot, you should check out the NESTLab fork of the aws-deepracer repository before proceeding. (If you're only interested in simulating it in ARGoS3 then visiting that repository isn't necessary.)

To Simulate the AWS DeepRacer in ARGoS3

Clone this repository on your local machine, then do the following to install the plugin (note: you will need ARGoS3 installed).

$ mkdir build_sim
$ cd build_sim
$ cmake -DCMAKE_BUILD_TYPE=Release ../src
$ make
$ sudo make install

To Run ARGoS3 Code on the AWS DeepRacer

⚠️ In general, you shouldn't have to build the real robot ARGoS3 code yourself from scratch since it won't run without specific ROS 2 nodes configured. This is taken care of by the NESTLab fork of the aws-deepracer repository; the following instructions are likely only useful for developers of this plugin.

The AWS DeepRacer runs a x86_64 architecture compute module with Ubuntu 20.04 loaded, so you can directly build the code onboard. To make ARGoS controllers work on the AWS DeepRacer robot, you need to install both the ARGoS core and the AWS DeepRacer plugin (this repository).

Designate a folder where you'll install all the ARGoS-related binaries. Let's call this folder ${INSTALLPREFIX}. Make sure the folder exists and it is writable by your user:

$ mkdir -p ${INSTALLPREFIX}

In the following, we will assume that you have three directories:

Variable Meaning
INSTALLPREFIX Where the compile code is installed
ARGOS3PATH Where the ARGoS3 core code is stored
DPRCRPATH Where the code of this plugin is stored

Installing ARGoS

$ cd ${ARGOS3PATH}
$ mkdir build_dprcr
$ cd build_dprcr
$ cmake -DCMAKE_BUILD_TYPE=Release \
    -DARGOS_BUILD_FOR=dprcr \
    -DARGOS_DOCUMENTATION=OFF \
    -DARGOS_BUILD_NATIVE=ON \
    ../src
$ make install
$ ldconfig

Installing the AWS DeepRacer plugin

$ cd ${DPRCRPATH}
$ mkdir build_dprcr
$ cd build_dprcr
$ cmake -DCMAKE_BUILD_TYPE=Release -DARGOS_BUILD_FOR=dprcr ../src
$ make install
$ ldconfig

Running the ARGoS3 controller

The instructions on how to run an ARGoS3 controller on the DeepRacer vehicle can be found in the NESTLab's aws-deepracer repository. (We put it there even though it references the an example from this repo because of the ROS installation requirements, which is achieved by following the steps listed there.)

Dev Notes

The following notes contain information on certain design and parameterization decisions in this plugin.

  • The Ackermann steering class is implemented as a 4WD model, i.e., all 4 wheels are driven by the throttle. Because the wheels don't actually turn, this doesn't affect the dynamics; otherwise, having very sticky wheels that aim to rotate at the same speed (i.e., no slippage or differentials) could break the dynamics. Under the hood, the Ackermann wheeled entity class is simply a container to store the steering angle and throttle speed. These values are then used to compute the center of mass' linear and angular velocities, which are the only quantities that the Chipmunk physics engine cares about.
  • Max & min steering and throttle speeds (source : cmdvel_to_servo_node package):
    • Max forward speed = 4.0 m/s
    • Max back speed = -4.0 m/s
    • Max and mni steering angle = (-$\pi$/6, -$\pi$/6) rad (assumption: right handed rule)
  • On the AWS DeepRacer physical vehicle a LiDAR sensor is mounted on the rear and tilted down by 6 degrees. It rotates at the angular velocity of 10 rotations per second and has a range of 15cm to 2m. It can detect objects behind and beside the host vehicle as well as tall objects unobstructed by the vehicle parts in the front. The angle and range are chosen to make the LiDAR unit less susceptible to environmental noise. (source: AWS)

About

Integration between ARGoS3 and the AWS DeepRacer robot.

Resources

Stars

Watchers

Forks

Releases

No releases published