Skip to content

bmuschko/gradle-clover-plugin

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Gradle Clover plugin Build Status

Clover Logo

Over the past couple of years this plugin has seen many releases. Thanks to everyone involved! Unfortunately, I don't have much time to contribute anymore. In practice this means far less activity, responsiveness on issues and new releases from my end.
I am actively looking for contributors willing to take on maintenance and implementation of the project. If you are interested and would love to see this plugin continue to thrive, shoot me a mail.

The plugin provides generation of code coverage reports using OpenClover.

Gradle Compatibility Tested

Built for OpenJDK JDK8 Tested with OpenJDK JDK8

Gradle Version Works
6.1 yes
6.9.4 yes
7.6.4 yes
8.10.1 yes

Gradle version 6.0.1 and older

Compatibility with Gradle 8.x required changes that make the plugin versions greater than 3.0.3 incompatible with Gradle 6.0.1 and older. Use 3.0.3 version or upgrade to a supported version of Gradle.

Gradle version 4.7 and older

For all versions of Gradle older than 4.8 use the 2.2.5 version of this plugin. Version 3.0.0 and newer only support Gradle 4.8 or later.

We are switching the build to run on JDK 11 which means we cannot test with Gradle 4.8 anymore, so I cannot guarantee that the 4.8 compatibility will be available after 3.0.2 release.

Usage

To use the Clover plugin, include in your build script:

apply plugin: 'com.bmuschko.clover'

The plugin JAR needs to be defined in the classpath of your build script. It is directly available on Gradle Plugins Portal. Alternatively, you can download it from GitHub and deploy it to your local repository. The following code snippet shows an example on how to retrieve it from Gradle Plugins Portal:

buildscript {
    repositories {
        gradlePluginPortal()
    }

    dependencies {
        classpath 'com.bmuschko:gradle-clover-plugin:3.0.7'
    }
}

To define the Clover dependency please use the clover configuration name in your dependencies closure. If you are working with a multi-module project make sure you apply the plugin and declare the clover dependency within the allprojects closure.

dependencies {
    clover 'org.openclover:clover:4.4.1'
}

With the introduction of the OpenClover support the licenseLocation clover convention is now unused. For compatibility with existing clover Gradle configurations the plugin will accept a value set but will do nothing with it.

GroovyDoc for API

The GroovyDoc for the plugin API can be found here: GroovyDoc

Tasks

The Clover plugin defines the following tasks:

  • cloverGenerateReport: Generates Clover code coverage report.
  • cloverAggregateReports: Aggregate Clover code coverage reports in a multi-module project setup. This task can only be run from the root directory of your project and requires at least one submodule. This task depends on cloverGenerateReport.

When the cloverAggregateReports is created for a multi-project configuration the Clover report for the aggregated results is located in the $buildDir/reports/clover location. The cloverGenerateReport task for the root project only will use the $buildDir/reports/clover-root location in this case. This is done to avoid a problem when the root project has Clover enabled code in addition to subprojects with Clover enabled code. The problem was that cloverGenerateReport and the cloverAggregateReports task would overwrite their outputs and would be perpetually not UP-TO-DATE.

Convention properties

  • initString: The location to write the Clover coverage database (defaults to .clover/clover.db). The location you define will always be relative to the project's build directory.
  • enabled: Controls whether Clover will instrument code during code compilation (defaults to true).
  • classesBackupDir: Deprecated - this is not used anymore
  • licenseLocation: Deprecated - this is not used anymore
  • includes: A list of String Ant Glob Patterns to include for instrumentation (defaults to '**/*.java' for Java projects, defaults to '**/*.java' and '**/*.groovy' for Groovy projects).
  • excludes: A list of String Ant Glob Patterns to exclude for instrumentation. By default no files are excluded.
  • testIncludes: A list of String Ant Glob Patterns to include for instrumentation for per-test coverage (defaults to '**/*Test.java' for Java projects, defaults to '**/*Test.java,**/*Test.groovy,**/*Spec.groovy' for Groovy and Grails3 projects).
  • testExcludes: A list of String Ant Glob Patterns to exclude from instrumentation for per-test coverage (for example mock classes, defaults to empty list - no excludes).
  • additionalSourceSets: Defines custom source sets to be added for instrumentation. See example clover closure for details below.
  • additionalTestSourceSets: Defines custom test source sets to be added for instrumentation. See example clover closure for details below.
  • targetPercentage: The required target percentage total coverage e.g. "10%". The build fails if that goals is not met. If not specified no target percentage will be checked.
  • optimizeTests: If true, Clover will try to optimize your tests; if false Clover will not try to optimize your tests. Test optimization is disabled by default. Note that Clover does not yet fully support test optimization for Groovy code; see CLOV-1152 for more information.
  • snapshotFile: The location of the Clover snapshot file used for test optimization, relative to the project directory. The snapshot file should survive clean builds, so it should not be placed in the project's build directory. The default location is .clover/coverage.db.snapshot.
  • includeTasks: A list of task names, allows to explicitly specify which test tasks should be introspected and used to gather coverage information - useful if there are more than one Test tasks in a project.
  • excludeTasks: A list of task names, allows to exclude test tasks from introspection and gathering coverage information - useful if there are more than one Test tasks in a project.
  • instrumentLambda: Controls which lambda types to instrument. Expression lambdas may cause instrumentation to crash.
  • useClover3: Deprecated - this is not used anymore
  • flushpolicy: This String attribute controls how Clover flushes coverage data during a test run. Valid values are directed, interval, or threaded. clover-setup Parameters
  • flushinterval: When the flushpolicy is set to interval or threaded this value is the minimum period between flush operations (in milliseconds). clover-setup Parameters

Within clover you can define coverage contexts in a closure named contexts. There are two types of coverage contexts: statement contexts and method contexts. You can define as many contexts as you want. Each of the context type closure define the following attributes:

  • name: A unique name that identifies the context. If you want to apply the context to your report you got to use this name as part of report filter attribute.
  • regexp: The specified structure or pattern that matches a context as part of the instrumented source code. Make sure that you correctly escape special characters.

Additionally, method contexts can be provided any of the following attributes to further configure how Clover should apply method coverage filters:

  • maxComplexity: Match a method to this pattern if its cyclomatic complexity is not greater than maxComplexity. In other words - all methods with complexity <= maxComplexity will be filtered out.
  • maxStatements: Match a method to this pattern if its number of statements is not greater than maxComplexity. In other words - all methods with statements <= maxStatements will be filtered out.
  • maxAggregatedComplexity: Match a method to this pattern if its aggregated cyclomatic complexity is not greater than maxAggregatedComplexity. In other words - all methods with aggregated complexity <= maxAggregatedComplexity will be filtered out. Aggregated complexity metric is a sum of the method complexity and complexity of all anonymous inline classes declared in the method.
  • maxAggregatedStatements: Match a method to this pattern if its number of aggregated statements is not greater than maxAggregatedStatements. In other words - all methods with aggregated statements <= maxAggregatedStaments will be filtered out. Aggregated statements metric is a sum of the method statements and statements of all anonymous inline classes declared in the method.

For more information on method contexts, see the main Clover documentation for this feature.

Within clover you can define which report types should be generated in a closure named report:

  • xml: Generates XML report (defaults to true).
  • json: Generates JSON report (defaults to false).
  • html: Generates HTML report (defaults to false).
  • pdf: Generates PDF report (defaults to false).
  • filter: A comma or space separated list of contexts to exclude when generating coverage reports. See Using Coverage Contexts. By default no filter is applied.
  • testResultsDir: Specifies the location of the JUnit4 test results XML report. This is necessary when the test use the new JUnit4 @Rule mechanism to declare expected exceptions. Clover fails to detect coverage for methods when this mechanism is used. This solution uses a feature of Clover that takes the coverage information directly from the JUnit XML report.
  • testResultsInclude: If testResultsDir is specified this must be an Ant file name pattern to select the correct XML files within the directory (defaults to TEST-*.xml).
  • alwaysReport: See OpenClover documentation for clover-report current
  • includeFailedTestCoverage: See OpenClover documentation for clover-report current
  • numThreads: See OpenClover documentation for clover-report current
  • timeout: See OpenClover documentation for clover-report current

Within report closure you can define a closure named columns to enable selection of columns for the report output. This feature implements support for the columns defined in Clover documentation Clover ReportComumns Nested Element. Each line in the closure must begin with the name of the column to add followed by a Groovy map with the 4 optional attributes for the column. We support format, min, max and scope. The format and scope values are checked against the documented supported contents and will throw errors if unsupported values are used. We do not implement support for the expression column at this time, if you attempt to use it the plugin will throw an error:

  • format: Determines how the value is rendered. Depending on the column, this may be one of raw, bar, % or longbar.
  • min: Sets a minimum threshold on the value of the column. If the value is less than this it will be highlighted.
  • max: Sets a maximum threshold on the value of the column. If the value is greater than this it will be highlighted.
  • scope: Controls at which level in the report the column will appear. The scope attribute can be one of: "package", "class" or "method". If omitted, the column will be used at every level in the report. Note that only the following columns support the scope attribute: expression, complexity, complexityDensity, coveredXXX, uncoveredXXX and totalXXX.

Within report closure you can define a closure named historical to enable Clover historical reports generation:

  • enabled: Enables generation of historical reports (defaults to false)
  • historyIncludes: An Ant GLOB to select specific history point files within the historyDir directory (defaults to clover-*.xml.gz)
  • packageFilter: Restricts the report to a particular package (optional, see package attribute of Clover historical element)
  • from: Specifies the date before which data points will be ignored (optional, see from attribute of Clover historical element)
  • to: Specifies the date after which data points will be ignored (optional, see to attribute of Clover historical element)
  • added: Closure to support nested added element from Clover historical element. Only the range and interval attributes are supported (optional, see added nested element of Clover historical element)
  • mover: Closure that can appear multiple times to support the movers element from Clover historical element. Only the threshold, range and interval attributes are supported (optional, see movers nested element of Clover historical element) See Clover Report Historical Nested Element

Furthermore, within clover you can define compiler settings which will be passed to java and groovyc upon compilation of instrumented sources. This is useful when specific compiler settings have been set on the main Java/Groovy compiler for your buildscript and need to be carried over to the compilation of the instrumented sources. These are held within a closure named compiler.

  • encoding: The (optional) encoding name. If not provided, the platform default according to the JVM will be used. See java.nio.charset.StandardCharsets for a full list of charsets.
  • executable: The (optional) javac executable to use, should be an absolute file.
  • debug: Controls whether to invoke javac with the -g flag. This is useful for Spring MVC code that uses reflection for parameter mapping. (defaults to false).
  • additionalArgs: The (optional) additional command line arguments for the compiler. This is useful for Spring MVC code that uses reflection for parameter mapping. This should be valid command line arguments as a spaces separated string. No attempt is made to validate this line, it is passed verbatim to the nested element for the Ant javac task.
  • additionalGroovycOpts: The (optional) additional options for the groovyc compiler. See [http://groovy-lang.org/groovyc.html#_ant_task]
  • sourceCompatibility: Overrides the Java Compiler to prevent using compatibility modes not supported by OpenClover
  • targetCompatibility: Overrides the Java Compiler to prevent using compatibility modes not supported by OpenClover

The sourceCompatibility and targetCompatibility options will work only as long as your code is compatible with the selections. If your code uses language features above the language level specified OpenClover will fail to compile the code.

The Clover plugin defines the following convention properties in the clover closure:

Example

clover {
    excludes = ['**/SynchronizedMultiValueMap.java']

    // This is the default testIncludes configuration
    testIncludes = ['**/*Test.java', '**/*Spec.groovy']
    testExcludes = ['**/Mock*.java']

    targetPercentage = '85%'

    // Closure based syntax for additionalSourceSets and
    // additionalTestSourceSets is also supported. Both
    // srcDirs and classesDir properties are required.
    // The syntax allows the following to occur as many times
    // as necessary to define each additional sourceSet.
    // From version 3.0.0 and later the configuration is
    // requiring the Gradle 4.0 outputDir for each language
    // in the sourceSet. If you have Java and Groovy sourceSets
    // you may need to specify each language in the sourceSet
    // separately.
    additionalSourceSet {
        srcDirs = sourceSets.generatedCode.java.srcDirs
        classesDir = sourceSets.generatedCode.java.outputDir
    }
    additionalSourceSet {
        srcDirs = sourceSets.generatedCode.groovy.srcDirs
        classesDir = sourceSets.generatedCode.groovy.outputDir
    }
    additionalTestSourceSet {
        srcDirs = sourceSets.integrationTest.java.srcDirs,
        classesDir = sourceSets.integrationTest.java.outputDir
    }
    additionalTestSourceSet {
        srcDirs = sourceSets.integrationTest.groovy.srcDirs,
        classesDir = sourceSets.integrationTest.groovy.outputDir
    }

    compiler {
        encoding = 'UTF-8'

        // Override the Java Compiler source and target compatibility settings
        sourceCompatibility = '1.8'
        targetCompatibility = '1.8'

        // if the javac executable used by ant should be the same as the one used elsewhere.
        executable = file('/usr/local/java/jdk1.8.0_05')
        // used to add debug information for Spring applications
        debug = true
        additionalArgs = '-parameters'
        additionalGroovycOpts = [configscript: project.file('myConfigScript.groovy').absolutePath]
    }

    contexts {
        statement {
            name = 'log'
            //start of line, any amount of whitespace then _LOG. minimal match before finding );
            regexp = '^[\s]+_LOG\..*?\);'
        }

        method {
            name = 'main'
            regexp = 'public static void main\\(String args\\[\\]\\).*'
        }
        method {
            name = 'getters'
            regexp = 'public [^\\s]+ get[A-Z][^\\s]+\\(\\)'
            maxStatements = 1
        }
        method {
            name = 'setters'
            regexp = 'public void set[A-Z][^\\s]+\\(.+\\)'
            maxStatements = 1
        }
    }

    report {
        html = true
        pdf = true
        xml = true
        filter = 'log,main,getters,setters'

        // Support capturing test results from JUnix XML report
        testResultsDir = project.tasks.getByName('test').reports.junitXml.destination
        testResultsInclude = 'TEST-*.xml'

        // Support controlling current-report for OpenClover
        alwaysReport = false
        includeFailedTestCoverage = false
        numThreads = 2
        timeout = '30 seconds'

        // Clover report nested columns support
        columns {
            coveredMethods format: 'longbar', min: '75'
            coveredStatements format: '%'
            coveredBranches format: 'raw'
            totalPercentageCovered format: '%', scope: 'package'
        }

        // Clover history generation support
        // See Clover documentation for details of the values supported
        historical {
            enabled = true
            historyIncludes = 'clover-*.xml.gz'
            packageFilter = null
            from = null
            to = null

            added {
                range = 10
                interval = '3 weeks'
            }
            mover {
                threshold = 1
                range = 10
                interval = '3 weeks'
            }
            mover {
                threshold = 1
                range = 10
                interval = '3 months'
            }
            mover {
                threshold = 1
                range = 10
                interval = '1 year'
            }
        }
    }
}

Console Clover Coverage Reporting

When clover.report.xml=true the cloverGenerateReport will emit the following information at quiet logger level in the console log.

Project <project name> classes coverage
Files: ## Packages: ## Classes: ## LOC: ## NCLOC: ##
Methods coverage ##.##
Elements coverage ##.##
Statements coverage ##.##
Conditionals coverage ##.##

Project <project name> test classes coverage
Files: ## Packages: ## Classes: ## LOC: ## NCLOC: ##
Methods coverage ##.##
Elements coverage ##.##
Statements coverage ##.##
Conditionals coverage ##.##

In a multiproject configuration this will be emitted by each cloverGenerateReport task in the project hierarchy. This does not get emitted by the aggregate report.

Groovy Compiler Configuration Scripts

Thanks to a contribution by community member we now have more power over the Groovy compilation process. The specific problem this feature solved is the inability to process correctly with OpenClover the @CompileStatic and @TypeChecked annotations in the code.

The solution involves installing a small Groovy Compiler configuration script that can perform an AST transformation of the code when it is compiled by the tools. The following example can be used as a basis for such a solution. All you need to do is place a groovy file with this content in your project directory and reference the file name using the new additionalGroovycOpts configuration.

withConfig(configuration) {
    inline(phase: 'CONVERSION') { source, context, classNode ->
        source.ast.unit.classes.each { clazz ->
            println "Fixing $clazz.name"
            clazz.annotations.removeAll { annotation -> annotation.classNode.name in ['CompileStatic', 'TypeChecked'] }
        }
    }
}

Project Properties

The Clover plugin uses the following properties:

  • -PcloverInstrumentedJar: This property can be used to prepare a JAR or EAR for distributed code coverage. When using this property the instrumented classes are left in the classes directory so that the jar tasks will bundle them. The property causes the jar tasks to execute after the test tasks to ensure that the Clover instrumentation has happened. This property should be used with a separate test execution in a Continuous Integration environment because the JAR files will be created with Clover instrumented code which cannot be used in a production environment.