Skip to content

knobunc/kindle-clock

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Literary Clock Scripts

See source repository -- https://github.com/knobunc/kindle-clock

What is this?

This is a repo to make installation and maintenance of the "literary clock" for the Kindle a little easier. All credit to tjaap, you can see his instructable at: https://www.instructables.com/id/Literary-Clock-Made-From-E-reader/

How to Install

  1. Jailbreak your Kindle, install launchpad, python, and usbnet. Instructions are at step 2 of https://www.instructables.com/id/Literary-Clock-Made-From-E-reader/
    1. I would make a directory of all of the uninstall scripts on the device too, so removal is easier
  2. git clone the repo to somewhere you can rsync from
  3. Install your private key in /mnt/us/usbnet/etc/dot.ssh so rsync will work for updates
  4. ssh into the kindle
    1. If you want to use usbnet rather than wifi (on Linux):
    2. Copy the launchpad/startClock.ini to the launchpad directory on the USB filesystem on the Kindle and hit shift shift spacebar to reread the launchpad config (or just Restart, the timing can be tricky)
    3. Start USBNet with shift n
    4. Enable the network interface
sudo ifconfig usb0 192.168.2.1/24
  1. And ssh in (-a disables agent forwarding so we can test our key). There is no password, hit enter.
  1. On the kindle rsync the utils directory:
/usr/bin/rsync -rltD --omit-dir-times --delete-delay --delay-updates [email protected]:kindle/kindle-clock/utils/ /mnt/us/utils
  1. Install the needed cron jobs:
mntroot rw
cat >> /etc/crontab/root <<EOF
* * * * * sh /mnt/us/timelit/timelit.sh
5 0 * * * sh /mnt/us/utils/update.sh > /mnt/us/updatelog 2>&1
EOF
mntroot ro
  1. Add a boot script to cleanup the clockisticking file... since it shouldn't be after a boot
mntroot rw
cp /mnt/us/utils/clean-clock /etc/init.d/
cd /etc/rcS.d
ln -s ../init.d/clean-clock S77clean-clock
mntroot ro
  1. Sync everything over with an update:
cd /mnt/us
sh /mnt/us/utils/update.sh
  1. Tell launchpad to reload its config:
/etc/init.d/launchpad restart
  1. Type shift c to start the clock (and to end it). You may need to wait a moment between the shift and the c for it to register correctly.

Usage

Commands added to launchpad:

  • shift c: Starts or stops the clock
  • shift n: Starts or stops usbnet
  • shift u: Kicks off a manual update

While the clock is running:

  • next page or previous page: Toggles display of the source of the quotes

Links

About

Kindle Customization Stuff

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published