Skip to content

Flashing OpenWrt directly from factory image running AirOS v6.1.7

Notifications You must be signed in to change notification settings

true-systems/ubnt-openwrt-flashing

Repository files navigation

BIG FAT WARNING

Flashing your router is always risky procedure. You're doing it at your own risk, you take the full responsibility for any action you choose, we cannot be held liable for any damage you do to your device, other devices, any other person or animal.

Purpose

Easier end-user flashing (no soldering needed) of OpenWrt firmware on UBNT M2HP (and maybe others?) devices running airOS v6.1.7.

License

mtd utility shipped in flash-sysupgrade.sh is licensed under GPLv2, everything else in this repository is free and unencumbered software released into the public domain.

Tested device list

Device Status Factory Sysupgrade
Bullet M2HP Working Yes Yes
PowerBeam M5-400 Working No Yes
Nanostation Loco M2 (xw) Working No Yes

We currently have access to just one type of device so can't confirm if similar approach might work on other devices with same airOS version. Feel free to test it and let us know.

Usage

Prerequisites

  1. You need to flash your UBNT M2HP with airOS v6.1.7 firmware no other airOS version is currently supported

  2. Download this toolkit sources

git clone https://github.com/true-systems/ubnt-bullet-m2hp-openwrt-flashing
cd ubnt-bullet-m2hp-openwrt-flashing

Flashing OpenWrt sysupgrade image

You can find more details about this method bellow.

make flash-sysupgrade FW_OWRT=/path/to/your/openwrt-ath79-generic-ubnt_bullet-m2hp-squashfs-sysupgrade.bin

Flashing OpenWrt factory image

You can find more details about this method bellow.

make flash-factory FW_OWRT=/path/to/your/openwrt-ath79-generic-ubnt_bullet-m2hp-squashfs-factory.bin

Example output from successful flashing sessions:

Other useful make targets

Get patched fwupdate.real command

For legal reasons, we can't redistribute patched binaries. To get patched fwupdate.real command with removed RSA image signature checking directly from your router with default IP address 192.168.1.20 use following commands.

make ubntbox.patched [email protected]
mv ubntbox.patched fwupdate.real
Restore from OpenWrt back to factory image

Before running every flash command, we create backup of currently running factory firmware image in firmware-backup.bin. You can then restore your router running OpenWrt with 192.168.1.1 IP address back to this firmware by using this make target.

make restore [email protected]

Background

It's not possible to use fwupdate.real utility for flashing OpenWrt to UBNT devices anymore as it allows flashing of signed firmware images only:

XW.v6.1.7# fwupdate.real -m /tmp/openwrt-ath79-generic-ubnt_bullet-m2hp-squashfs-factory.bin  -d
...
Current: XW.ar934x.v6.1.7.32555.180523.1754

New ver: XW.ar934x.v6.0.4-OpenWrt-r8452+9-e95e9fc
Versions: New(393220) 6.0.4, Required(393220) 6.0.4
FW Part: "kernel"(1), MAGIC: 'PART', Base: 0x9F050000, DLen: 0x00100000, PLen: 0x00100000
FW Part: "rootfs"(2), MAGIC: 'PART', Base: 0x9F150000, DLen: 0x00280004, PLen: 0x00660000
Bad Image Structure
Signature check failed

So we were left with probably these remaining flashing methods:

  • solder serial console and use TFTP for image flashing using tftpboot with initramfs image
  • try to flash sysupgrade image using mtd over SSH in airOS
  • dissassemble and patch fwupdate.real command so it would accept and flash unsigned OpenWrt factory firmware images

For end users, it's always more convenient to find some flashing method which wouldn't involve any soldering, so we've first tried to find out if it would be possible to flash OpenWrt with mtd over SSH in airOS. We've found out that it's doable.

Then just out of the curiosity and for some fun, we've tried to patch out RSA signature checking from fwupdate.real utility and check if it would allow us flashing unsigned factory firmware image generated by OpenWrt. We've found out, that it's doable also.

You can read more details about those two methods in more detail bellow.

Flashing factory image using patched fwupdate.real command over SSH in airOS v6.1.7

This approach is using patched fwupdate.real command from ubntbox utility. We've simply removed Bad Image Structure and Signature check failed checks, so it's now possible to flash factory images built with OpenWrt.

radiff2 with JSON output shows what was patched out in ubntbox.patched:

r2@6608438f7a41:~$ radiff2 -j /data/ubntbox /data/ubntbox.patched 

{"files":[{"filename":"/data/ubntbox", "size":715136, "sha256":"73460d7205549e1298fd0dad718edd61d06b8db07aecc637a41cbb547630e587"},
{"filename":"/data/ubntbox.patched", "size":715136, "sha256":"ca06d93741b30bdcb3a8b0577545aa0c32c4b5d9ac88f8580bae5a2774c890c3"}],
"changes":[{"offset":57104,"from":"16e0", "to":"0000"},
{"offset":57107,"from":"038f9982", "to":"00000000"},
{"offset":57112,"from":"10", "to":"00"},
{"offset":57115,"from":"772410ff2d92e4", "to":"00000000000000"},
{"offset":57123,"from":"1402e420212484", "to":"00000000000000"},
{"offset":57131,"from":"3803c028210320f809", "to":"000000000000000000"},
{"offset":57141,"from":"9e30231040", "to":"0000000000"},
{"offset":57147,"from":"0a8fbc", "to":"000000"},
{"offset":57151,"from":"288f8283f88f8480288f99814c8c45", "to":"000000000000000000000000000000"},
{"offset":57168,"from":"0320f80924846d148fbc", "to":"00000000000000000000"},
{"offset":57179,"from":"2810", "to":"0000"},
{"offset":57183,"from":"662410ff2c", "to":"0000000000"},
{"offset":60576,"from":"16f1fc878f848028", "to":"0000000000000000"}]

Unfortunately we can't redistribute patched ubntbox.patched binary, but you can get patched ubntbox from your router by just running make ubntbox.patched command. You can find output from flashing session of factory image with patched ubntbox.patched in flash-factory.log.

Flashing sysupgrade image using mtd over SSH in airOS v6.1.7

This approach is using mtd utility from Kamikaze 8.09.2 for flashing OpenWrt sysupgrade image. Unfortunately this is not so easy either, as there seems to be some flash write lock protection in place, kernel is probably expecting some secret cookie, before it would allow writing to MTD flash:

XW.v6.1.7# dd if=/dev/zero of=/tmp/kernel bs=$((0x100000)) count=1

XW.v6.1.7# /tmp/mtd write /tmp/kernel kernel
Unlocking kernel ... 
Writing from /tmp/kernel to kernel ...    

XW.v6.1.7# md5sum /tmp/kernel 
b6d81b360a5672d80c27430f39153e2c  /tmp/kernel

XW.v6.1.7# md5sum /dev/mtd2
30c85e4d3c1a88c566d83678055025b9  /dev/mtd2

And it seems that fwupdate.real utility is able to unlock this flash protection, so as a workaround (until proper fix) we can simply initiate flashing of the factory v6.1.7 firmware image and interrupt it during the flashing process:

XW.v6.1.7# fwupdate.real -m /tmp/XW.v6.1.7.32555.180523.1754.bin -d
Found mtd block: /dev/mtd0(u-boot)
... 
Block on '/dev/mtd3' at 00060000(len: 00010000) has no changes.
[%7  ]
^C

Now the flash should be unlocked. Then we just need to solve missing firmware partition in the airOS firmware, but this is doable as we can split the sysupgrade image to kernel and rootfs parts:

XW.v6.1.7# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00010000 "u-boot"
mtd1: 00010000 00010000 "u-boot-env"
mtd2: 00100000 00010000 "kernel"
mtd3: 00660000 00010000 "rootfs"
mtd4: 00040000 00010000 "cfg"
mtd5: 00010000 00010000 "EEPROM"

Flashing part of the sysupgrade image to the kernel partition and the rest of the image to rootfs:

CI_BLKSZ=65536
fw="/tmp/openwrt-ath79-generic-ubnt_bullet-m2hp-squashfs-sysupgrade.bin"
rootfs_size=0x$(grep rootfs /proc/mtd | cut -d ' ' -f2)
kernel_size=0x$(grep kernel /proc/mtd | cut -d ' ' -f2)
kernel_blocks=$(($kernel_size / $CI_BLKSZ))

dd if="$fw" bs=$CI_BLKSZ count=$kernel_blocks 2>/dev/null | /tmp/mtd -e kernel write - kernel
dd if="$fw" bs=$CI_BLKSZ skip=$kernel_blocks 2>/dev/null | /tmp/mtd -r -e rootfs write - rootfs

You can do all this steps manually or just use content of this repository for more automated process. You can find complete output from flashing session of sysupgrade image with make flash-sysupgrade command using above explained approach in flash-sysupgrade.log.

About

Flashing OpenWrt directly from factory image running AirOS v6.1.7

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •